Warning: file_exists(): open_basedir restriction in effect. File(/www/wwwroot/www.cncmachining-cn.com/wp-content/uploads/2020/09) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1922

Warning: is_dir(): open_basedir restriction in effect. File(/www/wwwroot/www.cncmachining-cn.com/wp-content/uploads/2020) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933

Warning: is_dir(): open_basedir restriction in effect. File(/www/wwwroot/www.cncmachining-cn.com/wp-content/uploads) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933

Warning: is_dir(): open_basedir restriction in effect. File(/www/wwwroot/www.cncmachining-cn.com/wp-content) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933

Warning: is_dir(): open_basedir restriction in effect. File(/www/wwwroot/www.cncmachining-cn.com) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933

Warning: is_dir(): open_basedir restriction in effect. File(/www/wwwroot) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933

Warning: is_dir(): open_basedir restriction in effect. File(/www) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933

Warning: is_dir(): open_basedir restriction in effect. File(/) is not within the allowed path(s): (/www/wwwroot/cncmachining-cn.com/:/tmp/:/proc/) in /www/wwwroot/cncmachining-cn.com/wp-includes/functions.php on line 1933
铝框CNC加工-CNC武林

铝框CNC加工

铝框CNC加工讲解。如图是一个标准的CAD制作出来的图纸,

铝框CNC加工要求:

1、材料:6063 铝合金;

2、表面处理:喷砂180#氧化;

3、未注公差:+/-0.01mm

4、周边不能刮手

序号 工序 工艺流程 准备工时 估计工时(H) 开始时间(H) 结束时间(H) 实际工时(H) 数量
10 下料 LY12        35x65x153   15件
20 CNC 铣主视图正反面外形及台阶、孔各尺寸到位,倒角。 0.5 0.5
30 铣床 侧面各孔尺寸到位,倒角。 0.2 0.2
40 钳工 攻牙,去披风 0.1 0.2
50 QA
60 表面处理 本色氧化
70 QA
本文由 CNC武林 作者:cnc加工 发表,其版权均为 CNC武林 所有,文章内容系作者个人观点,不代表 CNC武林 对观点赞同或支持。如需转载,请注明文章来源。

发表评论